Alessi Spare Part Replacement Guide: Model Numbers Explained
By ALESSI UK: Italian Design Home Accessories, Kitchenware & Gifts | Published: 2026-10-23
Category: How-to Guides
Learn how to identify the correct Alessi spare part using model numbers. Step-by-step guide for replacing handles, filters, and microfilters on your Moka coffee maker.
Quick answer
Match the model number printed on your Alessi Moka coffee maker to the correct spare part — handles, microfilters, and filter funnels each have a specific code.
Why model numbers matter for Alessi spare parts
Alessi uses distinct model numbers for each coffee maker size and type. Ordering a handle for a 6-cup model when you own a 3-cup version will not fit. The same applies to microfilters and filter funnels — they are size-specific.
The model number is usually stamped on the base of the coffee maker or on the original packaging. If you no longer have the box, check the bottom of the boiler or the inside of the lid.
Common pitfalls when ordering replacement parts
A common mistake is confusing the coffee maker model number with the spare part code. For example, the handle for the 6-cup Alessi Moka (model AAM33/6) has part code AAM33/6MA, not AAM33/6. Always verify you are ordering a spare part code, not the appliance model.
Another frequent error is buying a microfilter that fits a different generation of the same size coffee maker. The microfilter 17603 is designed for 6-cup models including 9090/6, 90002/6, and Menhir MA01/6 — but not for the AAM33/6 series.
How to identify and order the correct Alessi spare part
- Find your coffee maker model number: Turn the coffee maker upside down and look for a stamped number on the base. For Alessi Moka pots, it usually starts with 'AAM' followed by a slash and the cup size (e.g., AAM33/6 for 6 cups). Write this down exactly. Do not rely on memory — a single digit difference changes the spare part.
- Match the part type to the model number: Each spare part code is tied to a specific model and size. For the 6-cup AAM33/6, the handle and knob set is AAM33/6MA. For the 6-cup 9090 series, the microfilter is 17603. For the 1-cup 9090/1, the filter funnel is 17608. Check the compatibility list on the product page. A part that fits one 6-cup model may not fit another 6-cup model — always verify the exact model number.
- Order the genuine Alessi spare part: Purchase the part from an authorised Alessi retailer or directly from the Alessi UK store. Genuine parts are made to the same specifications as the original, ensuring proper fit and longevity. Third-party parts may be cheaper but often lack the precise tolerances needed for a proper seal and safe operation.
Key spare parts at a glance
- AAM33/6MA: Genuine spare part for Alessi Moka coffee maker, 6-cup size (AAM33/6). Includes both handle and knob for a complete replacement. If your existing handle or knob cracks or loosens, this one-piece replacement restores the original look and feel without needing to buy a new coffee maker.
AAM33/6MA - 17603: Microfilter for coffee maker 9090, 6 cup size (9090/6), 90002/6, 9090 Manico forato, 6 cup size (9090/6 100), Menhir, 6 cup size (MA01/6). A worn microfilter lets coffee grounds pass into your cup; replacing it with the correct 17603 part keeps your brew clean and your machine working properly.
17603 - 17608: This filter funnel is a spare part designed for use with the Alessi coffee maker model 9090, specifically for the 1-cup size (9090/1). If your original funnel is dented or the seal is damaged, swapping in the 17608 part ensures proper water flow and pressure for a single cup of espresso.
